| In 1961, the
        Jaguar E-Type saw the light of life as the successor to the famous XK
        120, 140 and 150 series. The E-Type was introduced at The Salon car show
        in Geneva on 15 March, and it was a smashing success of its sublime
        design and the technical concept. Salient point in this introduction in
        Geneva was that the E-Type ‘show car’ was ready for presentation
        just in time. In order to be in Geneva in time, the prototype with
        Jaguar PR man Bob Berry at the wheel had to make a crazy nocturnal ride
        from Coventry to Geneva. Bob left on 14 March 1961 at 19:00 hours. The
        weather was bad, and after the ferry he had to conquer many country
        roads, mountain tracks and passes. Speeding up to 220 kilometers an
        hour, Bob raced towards his destination, all on his own in the E-Type
        prototype. Bob arrived with his E-Type in one piece in Geneva at 11:40
        at the local Jaguar dealer, where the vehicle was prepared for its
        introduction to the press at the Salon one hour and twenty minutes
        later. It all turned out well, and the Jaguar E-Type scored a hit at the
        1961 Geneva Salon. The design of
        the E-Type series as it was introduced in 1961 is of almost unearthly
        beauty. Look at all the refined details: the bonnet, the headlights, the
        back lights, the recess for the wheel housing and the back side, and you
        will realize that you are looking at absolute, timeless beauty in
        automobile design. The E-Type
        was also a jewel for its engineering: its bodywork was a steel monocoque
        with a sub-frame attached in front of the cover in which the engine and
        the wheel-suspension were housed. In the back, under the monocoque,
        there was a second sub-frame to which the differential gear and the rear
        suspension were attached. The E-Type was equipped with independent
        wheel-suspension and disc brakes all round. The disc brakes in the back
        were placed against the differential to limit unsprung weight. The Jaguar
        E-Type series I was supplied as a roadster and as a FHC (Fixed Head
        Coupe). In principle, it was produced with the well-known XK 3.8-litre
        engine producing 245 hp, but it had a difficult gear shift. In 1964, it
        was supplied with a 4.2-litre engine and a new gearbox which was built
        in-house. In 1966 a
        more spacious 2+2 FHC variety came onto the market, with a longer
        wheelbase and more space inside.  Between 1966
        and 1968, the E-Type series 1.5 appeared, but the beautiful Perspex
        headlight covers were removed to comply with American laws. In 1968,
        American legislation demanded additional changes, which resulted in the
        Jaguar E-Type series II. The series II had higher-placed bumpers, which
        made that another place had to be found for the indicator/ rear light
        unit. A place was made for it below the bumpers. The E-Type series II
        was also provided with a safety steering column and a cleaner 4.2-litre
        engine. In 1971 the
        last E-Type version appeared: the series III. This series was the first
        to be fitted with a 5.3-litre V12 engine with 265 hp. The outer
        characteristics were changed once more. The E-Type series III was
        furnished with rounded wheel screens, steel rims and a chrome grille.
        But the most important news in the series III was that only two versions
        were available: the 2+2 FHC and the roadster, both on the long 2+2
        wheelbase. In 1973, the curtain was brought down on this car, which
        played such an important role in the motorcar history. Technical
        data aluminium 12
        cylinder V enginecylinder capacity: 5343 cc.
 carburettors: 4x
        Zenith-Stromberg 175 CD 2SE
 capacity: 276 DIN bhp. at 5850 rpm.
 top-speed: 240 km/h. - 150 mph.
 gearbox: 4-speed, manual
 weight: 1515 kg.
 |